One-Circuit Wireless Intelligent Receiving Receiver YET401PC-V2.0
One-Circuit Wireless Intelligent Receiving Receiver YET401PC-V2.0
Main technical indexes:
| Voltage | DC12V、DC24V(Optional) |
| Working temperature | -40℃-+80℃ |
| Frequency | 315MHz, 433MHz (optional) |
| Controller capacity | 500 remote buttons |
| Size | 62×43.5×30mm |
| Static current | ≤9mA |
| Flexibility | ≥-105dBm |
| Contact current | ≤10A |
Output Mode:
A. Signal delayed 3s: short block inserted on 1
B. Signal toggle: short block inserted on 2
C. Signal latch: short block inserted on 3 (301 function is of momentary)
D. Signal momentary: not insert short block
(Details refer to Wiring diagram)
B. Signal toggle: short block inserted on 2
C. Signal latch: short block inserted on 3 (301 function is of momentary)
D. Signal momentary: not insert short block
(Details refer to Wiring diagram)
Methods and steps for learning and clearing code:
1、Learning & fixed code:
Press "Learning" button on the receiver, release it until LED light flickers, Receiver
in learning status (LED goes out this moment), then press related button on Remote
control to monitor this Receiver. When LED on Receiver flickers 5 times and then
goes out, it indicates Learning has been done. It can response to up to 30 Remote
control of this mode.
in learning status (LED goes out this moment), then press related button on Remote
control to monitor this Receiver. When LED on Receiver flickers 5 times and then
goes out, it indicates Learning has been done. It can response to up to 30 Remote
control of this mode.
If Remote control is lost and wanting to make it invalid totally, press "Learning" button
(more than 8s) until LED goes out, then Receiver will eliminate all contents automatically.
If want to reuse it, just learning one more time again.
(more than 8s) until LED goes out, then Receiver will eliminate all contents automatically.
If want to reuse it, just learning one more time again.
2、Rolling code:
Press "Learning" button on the Receiver, release it until LED light flickers, Receiver
in First Learning status (LED goes out this moment), then press related button on
Remote control to monitor this Receiver. If LED light is flickering, this indicates First
Learning has been done; Release it and Receiver in Second Learning status (LED
goes out), press the same button on Remote control, LED will flickers 5 times quickly,
then goes out, this indicates Learning has been accomplished. It can response to up
to 6 buttons on Remote control of this mode.
in First Learning status (LED goes out this moment), then press related button on
Remote control to monitor this Receiver. If LED light is flickering, this indicates First
Learning has been done; Release it and Receiver in Second Learning status (LED
goes out), press the same button on Remote control, LED will flickers 5 times quickly,
then goes out, this indicates Learning has been accomplished. It can response to up
to 6 buttons on Remote control of this mode.
If Remote control is lost and wanting to make it invalid totally, press "Learning" button
(more than 8s) until LED goes out, then Receiver will eliminate all contents automatically.
If want to reuse it, just learning one more time again.
(more than 8s) until LED goes out, then Receiver will eliminate all contents automatically.
If want to reuse it, just learning one more time again.
If you like this style product.pls link:http://szyet.com/product/one-circuit-wireless-intelligent-receiving-receiver-yet401pc-v2-0/?preview_id=5685&preview_nonce=255c49f6e0&_thumbnail_id=5688&preview=true
Any question,pls contact:sales@szyet.com
评论
发表评论