Two-channel Wireless Intelligent Receiver Controller YET402PC-220V.TG.V10
Two-channel Wireless Intelligent Receiver Controller YET402PC-220V.TG.V10
The YET402PC-220V.TG.V10 (two-channel wireless intelligent receiving controller) produced by our company outputs the switching signal for two relays, which can make the equipment to be controlled reach the positive and negative of the motor; or the switch can be turned on and off. Conversion and requirements for various special control procedures. Mainly used in electric doors, windows, lifting equipment, gateways, lifts, industrial control and security industries.
The wireless receiving controller has the characteristics of high confidentiality, large storage capacity, stable performance, low power consumption, and is convenient to use, and does not need to adopt traditional jumper or dial switch coding, and only needs to transmit the wireless signal transmitted by the remote controller. The receiving controller receives and stores, and can be used together. If the learned remote control is lost during use, simply clear the information stored in the receiving controller, and the lost remote controller will not be able to remotely control the receiving controller. To regain the right to use, the owner must Re-learn once to use.
The YET402PC-220V.TG.V10 (two-channel wireless intelligent receiving controller) produced by our company outputs the switching signal for two relays, which can make the equipment to be controlled reach the positive and negative of the motor; or the switch can be turned on and off. Conversion and requirements for various special control procedures. Mainly used in electric doors, windows, lifting equipment, gateways, lifts, industrial control and security industries.
Output Mode：
A. Signal delayed 3s: short block inserted on 1
B. Signal toggle: short block inserted on 2
C. Signal latch: short block inserted on 3
D. Signal momentary: not insert short block
(Details refer to Wiring diagram)
B. Signal toggle: short block inserted on 2
C. Signal latch: short block inserted on 3
D. Signal momentary: not insert short block
(Details refer to Wiring diagram)
Main Technical indicators:
| Working Voltage | 220V |
| Working Temperature | -40° C to 80° C |
| Working Frequency | 315MHz、433MHz (Optional) |
| Remote Control Capacity | 30(Learing code) 6(Rolling code) |
| Static Operating Current | ≤7mA |
| Receiving sensitivity | ≥-105dBm |
| Contact current | ≤10A |
| Size | 74.5mm*54.5mm*27mm |
Any question,please contact:sales@szyet.com
评论
发表评论